Change your country/region

It looks like you entered an employee email address, but this is the customer sign-in. Use the link below instead.

Item: 385254

Beadex® Brand Topping Joint Compound

Lightweight, smooth drywall topping compound for use in second and third finishing coats.

Overview

Overview

Only available in the Western U.S.
Delivers smooth joint finishing results for use in second and third coats.

Main Features

Beadex® Brand Topping Joint Compound is a low-shrinkage compound recommended for use in second and third coats over USG Sheetrock® Brand Taping and All-Purpose Joint Compounds.
  • Applies quickly, providing easy workability, excellent slip and bond, and low shrinkage
  • Can be used directly from the container and requires only minimal mixing, thinning, and retempering
  • Unsuitable for embedding tape or for use as a first coat over metal corner trim and fastener
  • Meets ASTM C475

Specifications

Submittal Sheet PDF 288.2 KB

Sustainability

  • GREENGUARD Certification Yes

Documents & Files

Data Sheets & Specifications

Data/Submittal Sheet (English) PDF 288.2 KB

White Papers

White Paper (English) PDF 329.7 KB

Installation & Technical Manuals

Technical Guide (English) PDF 428.6 KB
Installation Guide (English) PDF 7.4 MB

SDS, Certifications & Reports

SDS (English) PDF 128.3 KB
SDS (Spanish)

Ask a question

Our customer support team will get back to you as soon as possible.

Question Guidlines

  • Questions should relate to this product specifically.
  • For help with pricing, availability, or delivery, please call 800.874.4968 (Monday–Friday, 7am–6pm Central)
  • All questions and answers follow USG’s Terms & Conditions.
  • Your question and USG’s answer may be posted to this page in the future, but none of your personal info will be included.

 Thanks for your message. We’ll be in touch!

q & a

  • Can fiberglass tape be set with drying-type compounds?

    No. When using fiberglass tape, only setting-type joint compounds like Sheetrock® Brand Durabond® and Sheetrock® Brand Easy Sand™ should be used for the first coat over the tape. Ready-mixed drying-type compounds can be used for subsequent finishing coats.

  • What is the best way to store ready-mix compound for another use?

    Clean sides and lid of container so no dried compound falls into the mixture. Level joint compound surface with a knife and cover container tightly. If storing, cover leveled surface of joint compound with approximately 1/2" of clean water and cover container tightly. Pour off water before reusing joint compound. Do not store in direct sunlight and protect from extreme heat and cold. The shelf life of an unopened container is up to nine months under proper storage conditions.

  • Can ready-mixed joint compound be used on exterior applications?

    No. Sheetrock® Brand Setting-Type Joint Compounds (Durabond® and Easy Sand™) are recommended to treat joints in exterior gypsum ceiling board.

  • Why do stains appear when retexturing a wall or ceiling?

    Over time stains settle into a wall or ceiling. When that area is retextured the stains photograph through causing a yellowing or browning effect. The best way to prevent staining is to apply a stain blocker, primer, and sealer.

  • How long does it take joint compound to dry?

    Under conditions of a temperature of 70° and 70% humidity, joint compound should dry in about 24 hours. Higher humidity and/or lower temperatures will slow drying time.

  • Can I use two different joint compounds on the same joint? Can I mix two joint compounds together to save time?

    Yes, different joint compounds can be used over each other.

    No, different joint compounds should never be mixed with each other.

  • What is the fire rating of joint compound?

    Joint compound does not have a fire rating by itself, but does meet ASTM C475. When fire testing a wall the fire rating is not for individual products, but for all the system components together. USG Joint Compounds are used in numerous fire-tested assemblies. These are outlined in USG Publication SA100 Construction Selector.

  • Can additives be mixed into joint compound?

    There are various products in the market which, when mixed with joint compounds, claim to improve various performance attributes of joint compounds.

    USG does not endorse the use of additives in USG joint compounds for the following reasons:

    An additive can adversely affect the unique balance of the many performance attributes each joint compound has been formulated to provide.

    It is virtually impossible for an additive manufacturer to know if their additive is compatible at all times with all of USG's product formulations.

    USG has no control over the manufacture and quality of additives manufactured by others.

    Note - For taping and finishing joints, water can be added as necessary. USG recommends adding water in increments of a half-pint to avoid over thinning.

    See USG Technical Information Sheet J1716 for more information.

  • What is the biggest gap between joints that can be filled with joint compound?

    The maximum gap should not exceed 1/8 of an inch.

  • Have a question?

    Let us do the research. We'll get back to you as quickly as we can.

    Ask USG
  • Need help right away?

    Call our Technical Support team at 800-874-4968 (Monday-Friday, 7:30 am - 4 pm Central).

Top