It looks like you entered an employee email address, but this is the customer sign-in. Use the link below instead.

UL P562

Steel C-Joist (Load-Bearing)

Fire Rating 1 hours
System STC n/a
System Thickness Varies

Assembly Construction

Assembly Construction

Layer 1 - Roofing Membrane:

Ballasted, adhered or mechanically attached to the Insulation; Hot-mopped or cold-application, Class A, B or C Covering or Single-Ply Membrane

Layer 2 - Roof Insulation:

Polyisocyanurate Insulation Boards, 1" Thickness Min. with no limit on Max. Overall Thickness. Loosely laid, adhered or mechanically fastened to the Gypsum Sheathing and Structural Cement-Fiber

Layer 3 - Gypsum Board:

1/2" Thick Min., Loosely laid, adhered or mechanically attached to Structural Cement-Fiber Units (UL Type FRX-G)

Layer 4 - Structural Cement-Fiber Units:

3/4" Thick, USG Structural Panel Concrete Subfloor (USGSP), with long edges tongue and grooved, long dimension of panels to be perpendicular to Joists (UL Type USGSP)

Layer 5 - Steel Joists:

10" Deep, 16ga., Spaced 24" Max. O.C.

Layer 6 - Clip Angles (Not Shown):

One Clip Angle per Joist End

Layer 7 - Joist Bridging (Not Shown):

V-Bracing of 1-1/2", 20ga., Galvanized Steel between Channels

Layer 8 - Insulation:

3-1/2" Thick Glass Fiber Batt Insulation

Layer 9 - Steel Framing Members:

Suspension System may be used in lieu of the Resilient Channels. Main Runners, Cross Tees, Cross Channels and Wall Angle as listed below (UL Type DGL):

Layer 10 - Main Runners:

4' O.C. Main Runners suspended by 12ga. Min. Hanger Wire, 16" O.C.

Layer 11 - Cross Tees:

16" O.C.

Layer 12 - Cross Channels:

16" O.C.

Layer 13 - Gypsum Board:

5/8" Thick Gypsum Board (UL Type ULIX™)

Notes