Change your country/region

It looks like you entered an employee email address, but this is the customer sign-in. Use the link below instead.

Donn® Brand Acoustical Suspension System Accessories

All of the tools you need to install your suspension system quickly and easily.

Overview

Overview

All of the tools you need to install your suspension system quickly and easily. Donn® Brand Acoustical Suspension System Accessories; provides everything you need to install your suspension system. With everything from galvanized hanger wire to stabilizer bars to cross tee hole punches, your ceiling project is sure to go quickly and smoothly.

Main Features

Donn® Brand Acoustical Suspension System Accessories, you will be fully equipped for any and every ceiling installation project.

Documents & Files

White Papers

Sell Sheet (English) PDF 2.5 MB

Catalogs & Brochures

System Catalog (English) PDF 45.2 MB

SDS, Certifications & Reports

Evaluation Reports (English)

Warranties

Warranties (English) PDF 146.0 KB

Ask a question

Our customer support team will get back to you as soon as possible.

Question Guidlines

  • Questions should relate to this product specifically.
  • For help with pricing, availability, or delivery, please call 800.874.4968 (Monday–Friday, 7am–6pm Central)
  • All questions and answers follow USG’s Terms & Conditions.
  • Your question and USG’s answer may be posted to this page in the future, but none of your personal info will be included.

 Thanks for your message. We’ll be in touch!

q & a

  • How is the load test data collected for ceiling grid?

    Load data and spans are based on simple span tests in accordance with ASTM C635, with a deflection limitation of L/360.

  • What are the best grids to use in an area that is accessible to moisture?

    The best grids to use in an area accessible to moisture are the Donn® AX™ Acoustical Suspension System or the Donn® ZXLA™ Acoustical Suspension System.

  • How do you remove cross tees without a tool?

    To remove a cross tee, push up on the main tee with your thumbs (where the cross tee is connected) and rotate it until the cross tee pops up and out of the slot.

  • How much force is required to insert a cross tee with a quick release clip?

    It takes 12-14 pounds of force to install a cross tee.

  • What gauge hanger wire is needed to install grid?

    For residential installation 18-gauge wire is required. For commercial installation 12-gauge wire is required.

  • What is the warranty for a system, that uses USG tile and grid together?

    There is a lifetime warranty on any ceiling system that is used in conjunction with our tile and grid. All grid is lifetime when used with USG tile, however not all tile is lifetime when used with USG grid. See complete warranty for details.

  • What is the standard warranty of grid?

  • How is the spacing of wire hangers determined for fire-rated assemblies?

    All systems must be installed and tested in compliance with ASTM C636.

  • When installing grid, what is the minimum clearance needed from the overhead structure?

    Minimum clearance is 4", which allows ceiling tiles to be inserted and removed freely.

  • Which grid is the best grid to use in a Clean Room environment?

    USG Donn® Brand CE™ Acoustical Suspension System is the best grid for a Clean Room environment.

  • How do you take main tees apart without a tool?

    Facing the main tee splice place your left hand near the left side of the splice and right hand near the right side of the splice. Using a shearing motion, push with your left hand and pull with your right hand. This disconnects the main tee splice. Be sure to straighten the end tabs before attempting to reconnect.

  • Have a question?

    Let us do the research. We'll get back to you as quickly as we can.

    Ask USG
  • Need help right away?

    Call our Technical Support team at 800-874-4968 (Monday-Friday, 7:30 am - 4 pm Central).

Top