Welcome back! You are now signed in.
You have been logged out due to inactivity
Please enter the email address you used to create the account. We'll send you a link that lets you create a new password.
Please check your email. Click the link in the email to create a new password.
Specially formulated plaster that produces denser, longer-wearing jigger molds used in mechanical clay-forming machinery.
Key Documents & Design Files
Main FeaturesPuritan® Pottery Plaster is specifically designed for jigger molds used in mechanical clay-forming machinery. Stronger thanNo. 1 Pottery Plaster, Puritan® Pottery Plaster:
Data Sheets & Specifications
|Data/Submittal Sheet (English)||PDF 232.6 KB|
Catalogs & Brochures
|System Catalog (English)||PDF 18.5 MB|
Installation & Technical Manuals
|Installation Guide (English)|
SDS, Certifications & Reports
|SDS (English)||PDF 143.7 KB|
|Certificates (English)||PDF 972.9 KB|
Our customer support team will get back to you as soon as possible.
How do I mix plaster?
You will need a bucket, scale and mixing equipment. Mixing could be accomplished through basic hand mixing with a large spoon, but mechanical mixing is preferred. An electric drill with a cage mixer head attached is good for small batches.
The first step involves measuring and adding enough water to the bucket to achieve the desired consistency. You then need to weigh out enough gypsum plaster to meet the proper ratio for the selected water volume. Sift the plaster into the bucket of water and allow the plaster to soak for 1 to 2 minutes. Follow this immediately with mixing, generally for 1 to 2 minutes based on product.
NOTE: If mixing by hand, use vigorous stirring action. After mixing and pouring the gypsum slurry, make sure to clean all tools and the mixing vessel before the plaster hardens.
For more detail on mixing, see USG publication IG503, Plaster Mixing Procedures.