Sign In
You're All Set
Welcome back! You are now signed in.
You have been logged out
You have been logged out due to inactivity
Forgot Password
Please enter the email address you used to create the account. We'll send you a link that lets you create a new password.
You're All Set
Please check your email. Click the link in the email to create a new password.
Reset Password
You're All Set
Success! Your password has been updated.
Change Password
You're All Set
Success! Your password has been updated.
Airtrol® Geobinder
Spray applied gypsum binder for erosion control suitable for a variety of water- and wind-induced erosion sites.
Overview
Overview
Main Features
Produced from high purity mined gypsum, Airtrol® Geobinder is a mineral based binder which, when mixed with water and mulch and sprayed through hydraulic equipment, sets in a controlled, predictable way to bind soil particles and form an erosion-resistant crust. Airtrol® Geobinder is:
- Nontoxic, noncombustible, pH neutral and harmless to fish, birds, plants and animals
- Suitable for all disturbed soil surfaces whether inclined or flat, multiple soil types,landfill final covers, commercial and residential construction, golf course construction, mine reclamation and around water retention ponds
- Cost-effective; can be used with a wide variety of mulch (cellulose or wood fiber)
- Helpful in promoting plant growth by providing Calcium and Sulfur, acting as a flocculent for heavy clay soils to increase water penetration to root systems
- Effective in holding both seed and fertilizer in place in contact with the soil surface and upon degregation over time providing nutrient value to the soil profile
Documents & Files
Catalogs & Brochures
| Brochure (English) | PDF 172.9 KB |
Installation & Technical Manuals
| Technical Guide (English) |
SDS, Certifications & Reports
| SDS (English) | PDF 46.7 KB |
| SDS (Spanish) | PDF 48.9 KB |
| Certificates (English) | PDF 972.9 KB |
Ask a question
Our customer support team will get back to you as soon as possible.
Question Guidlines
- Questions should relate to this product specifically.
- For help with pricing, availability, or delivery, please call 800.874.4968 (Monday–Friday, 7am–6pm Central)
- All questions and answers follow USG’s Terms & Conditions.
- Your question and USG’s answer may be posted to this page in the future, but none of your personal info will be included.
q & a
-
How do I mix plaster?
You will need a bucket, scale and mixing equipment. Mixing could be accomplished through basic hand mixing with a large spoon, but mechanical mixing is preferred. An electric drill with a cage mixer head attached is good for small batches.
The first step involves measuring and adding enough water to the bucket to achieve the desired consistency. You then need to weigh out enough gypsum plaster to meet the proper ratio for the selected water volume. Sift the plaster into the bucket of water and allow the plaster to soak for 1 to 2 minutes. Follow this immediately with mixing, generally for 1 to 2 minutes based on product.
NOTE: If mixing by hand, use vigorous stirring action. After mixing and pouring the gypsum slurry, make sure to clean all tools and the mixing vessel before the plaster hardens.
For more detail on mixing, see USG publication IG503, Plaster Mixing Procedures.
-
Have a question?
Ask USGLet us do the research. We'll get back to you as quickly as we can.
-
Need help right away?
Call our Technical Support team at 800-874-4968 (Monday-Friday, 7:30 am - 4 pm Central).